10.
Connect all cables and external attachments.
11.
Plug the power cord.
12.
Power on the NAS.
Replacing Memory Modules
The NAS has four memory slots. Depending on the model, you can increase the memory capacity of the
NAS by upgrading one or all modules.
Use only QNAP modules of the same type and capacity to maintain system performance and stability. You
can purchase QNAP memory modules from authorized resellers.
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Power off the NAS.
2.
Unplug the power cord from the electrical outlet.
3.
Disconnect all cables and external attachments.
4.
Remove the case cover.
a.
Remove the screws that secure the case cover to the chassis.
b.
Slide the case cover back.
c.
Pull the case cover up until it completely detaches from the chassis.
TVS-882BR User Guide
Installation and Configuration
39