Note
Depending on the hardware configuration, you may need to remove an existing SATA cable.
8.
Verify that the other SATA connector is inserted to the on-board SATA port below the drive bay.
Note
The TVS-882BR-i5-16G and TVS-882BR-i7-32G include a SATA cable pre-attached to the
chassis.
9.
Attach the case cover.
a.
Slide the case cover down until it completely connects with the chassis.
b.
Slide the case cover forward.
c.
Attach the screws to the back side of the case.
TVS-882BR User Guide
Installation and Configuration
26
