a.
Connect the USB cable to the USB Type-C port on the expansion unit.
b.
Connect the USB cable to a USB 3.2 Gen 1 Type-A port or USB Type-C port on the NAS.
Note
This image shows the NAS connected to TL-R1200-RP USB expansion units.
2.
Power on the expansion units.
3.
Verify that the expansion units are recognized by the NAS.
a.
Log on to QuTS hero as administrator.
b.
Go to
Main Menu
>
Storage & Snapshots
>
Overview
>
System
.
c.
Verify that the expansion units are listed.
QuTS hero Installation
The TS-hx83XU-RP uses the QNAP QuTS hero operating system. You can install QuTS hero using any of
the following methods:
TS-hx83XU-RP User Guide
Installation and Configuration
35
