background image

1. Preface

About This Guide

This guide provides information about the device and step-by-step instructions on installing the hardware. It
also provides instructions on basic operations and troubleshooting information.

Audience

This document is intended for storage administrators. This guide assumes that the user is knowledgeable
and qualified to install, maintain, and troubleshoot issues involving servers, server components, and storage
systems. This guide also assumes that the user is trained to recognize hazards, including the appropriate
actions the user needs to take to prevent personal injury and damage to data and property.

Document Conventions

Symbol

Description

Notes provide default configuration settings and other supplementary
information.

Important notes provide information on required configuration settings and other
critical information.

Tips provide recommendations or alternative methods of performing tasks or
configuring settings.

Warnings provide information that, when ignored, may result in potential loss,
injury, or even death.

TS-hx83XU-RP User Guide

Preface   

2

Summary of Contents for TS-h 83XU-RP Series


















































Reviews: