QNAP TS-401T Turbo Server, User Manual

Page: 145 / 145

- 145 -
Disk Configuration/ RAID Configuration
English Display Status Description
Ready The status of current disk or disk configuration is normal
Unmounted Hard disk is not installed or hard disk configuration is
not configured
Not Active RAID configuration is damaged and cannot be enabled
9
When this message is shown, users should back up
disk data immediately and replace the failed disk.
Uninitialized
Initialization fails
9
Single disk does not support hot swap. If the hard
disk is unplugged when TS-401T is turning on, disk
configuration will be damaged and will lead to data
loss.
In degraded mode A disk of RAID 1 or RAID 5 configuration is unplugged or
fails. RAID data protection mechanism fails.
9
In this situation, users should back up disk data
immediately and replace the failed disk to rebuild
RAID configuration.
Note:
1. When R/W error is displayed for hard disk status, or “Not active” or “In
degraded mode” is displayed for RAID configuration, please replace the hard
disk immediately to ensure RAID data protection can work properly. QNAP is
not responsible for any data loss caused by delay in replacing failed disks in a
RAID configuration by users intentionally or unintentionally.
2. QNAP Systems, Inc. guarantees that all TS-401T (TS-401T) released have
passed strict and complete QA test and can operate properly in normal
condition. QNAP offers conditional and limited maintenance for TS-401T
within warranty period. However, QNAP disclaims the responsibility for any
data loss or damage, or business loss of users. In no event shall the liability
of QNAP exceed the price paid for the product from direct, indirect, special,
incidental, or consequential software, or its documentation.