QNAP TS-1263XU User Manual Download

Page: 33 / 50

18.

Review the settings.

19.

Click

Apply

A confirmation message appears.

Warning

Clicking

Confirm

deletes all data on the drive before installing QTS.

20.

Click

Confirm

QTS is installed.

Installing QTS Using the Cloud Key

Warning

Installing QTS deletes all data on the drives. Back up your data before proceeding.

Power on the NAS.

Connect the NAS to the internet.

Go to the QNAP Cloud Installation page using one of the following methods:

• On your computer, go to

http://install.qnap.com/

• Scan the QR code on the NAS using a mobile device.

The web page lists all the uninitialized QNAP NAS devices on the local network.

Find your NAS from the list and then click

Initialize

Note

If your NAS is not listed, follow the instructions on the web page to specify the Cloud Key on the
NAS.

The installation wizard opens in the default web browser.

Create an account or sign in to myQNAPcloud.

Note

You must return to this page to complete the installation after creating an account.

Specify the myQNAPcloud device name for the NAS.

Note

The myQNAPcloud device name is used when remotely accessing the NAS.

Optional: Select

CloudLink

Note

• CloudLink allows you to remotely access the NAS without having to configure port

forwarding on your router. You can remotely access the NAS by logging into QTS or by
using mobile apps.

• You can also enable CloudLink by installing the CloudLink app on the NAS.

Click

Next

The

Smart Installation Guide

opens in the default web browser.

TS-x63XU User Guide

Installation and Configuration

Summary of Contents for TS-1263XU



















































Search results

Summary of Contents for TS-1263XU

Reviews:

Related manuals for TS-1263XU

Brands by name

Popular brands

QNAP TS-1263XU, User Manual

Search results

Summary of Contents for TS-1263XU

Reviews:

Related manuals for TS-1263XU

Brands by name

Popular brands