2. Product Overview
This chapter provides basic information about the QNAP TL-R400S and TL-R1200S-RP JBOD enclosures.
About QNAP JBOD Enclosures
QNAP JBOD enclosures are designed to increase the capacity and utility of your NAS or computer and
provide a wide range of storage applications. Drives installed in JBOD enclosures can be managed
independently or be configured as software RAID by the host device. The TL-R400S and TL-R1200S-RP
feature SFF-8088 SATA 6 Gb/s ports to ensure quick and efficient data transfer between the JBOD
enclosure and the host device.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the
QNAP Warranty Terms and Conditions
.
Component
TL-R400S
TL-R1200S-RP
Ordering Information
Ordering P/N
TL-R400S
TL-R1200S-RP
Storage
Drive bays
4 x 3.5-inch SATA 6 Gbps
12 x 3.5-inch SATA 6 Gbps
Drive compatibility
• 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid-state drives
Hot-swapping
Supported
External I/O Ports & Expansion Slots
SFF ports
1 x SFF-8088 (drive bays 1-4)
3 x SFF-8088
• Port 1: Drive bays 1-4
• Port 2: Drive bays 5-8
• Port 3: Drive bays 9-12
Important
• Each SFF-8088 port supports four SATA 6 Gb/s lanes.
• These ports are only for connecting the host bus
adapter to a JBOD enclosure.
Interface
QNAP JBOD Enclosure - TL-R400S/TL-R1200S-RP User Guide
Product Overview
4
