3. Hardware Installation
This section provides information on installing drives and connecting the JBOD enclosure to a NAS or
computer.
Drive Installation
QNAP JBOD enclosures are compatible with 3.5-inch and 2.5-inch hard drives and 2.5-inch solid-state
drives.
Installing 3.5-inch Drives on 3.5-inch Trays
Warning
Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Power off the JBOD enclosure.
2.
Remove a drive tray.
a.
Pull the handle to release the tray.
b.
Pull the tray out.
3.
Install a drive on the tray.
a.
Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes
on the bottom of the tray.
b.
Attach the screws.
QNAP JBOD Enclosure - TL-R400S/TL-R1200S-RP User Guide
Hardware Installation
12