TL-R1200S-RP
c.
Optional: Connect additional JBOD enclosures to the server.
4.
Power on the JBOD enclosures.
5.
Power on the server.
6.
Verify that the JBOD enclosure is recognized by the server.
a.
Go to your server's disk management utility or open QNAP External RAID Manager in Windows or
Linux.
Note
To download QNAP JBOD Manager, go to
.
b.
Verify that the JBOD enclosure is listed.
Hot-Swapping Redundant Power Supply Units
Warning
The NAS may have one or more power supply unit (PSU) cords. To avoid serious injuries,
a trained service technician must disconnect all PSU cords before installing or replacing
system components.
Note
This task applies to the TL-R1200S-RP JBOD Enclosure.
1.
Power off the NAS.
QNAP JBOD Enclosure - TL-R400S/TL-R1200S-RP User Guide
Hardware Installation
22
