3. Hardware Installation
This section provides information on installing drives, connecting and disconnecting the JBOD enclosure
from a NAS, hot-swapping redundant power supply units, and rail kits.
Installing drives
The TL-Rx00PES-RP is compatible with 3.5-inch hard drives and 2.5-inch solid-state drives.
Installing 3.5-inch hard drives on the TL-R1200PES-RP or TL-R1600PES-RP
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the JBOD enclosure.
2. Remove the drive tray.
a. Pull the handle to release the tray.
b. Pull the tray out.
QNAP JBOD Enclosure User Guide | TL-R1200PES-RP, TL-R1600PES-RP, TL-R2400PES-RP
Hardware Installation
14
