manualshive.com logo in svg

QNAP QSW-M2106R, User Manual

Share
Download
QNAP QSW-M2106R User Manual Download Page 31

Settings

Requirements

Firmware version

If you are updating the firmware using Firmware Update or Qfinder

Pro, ensure the selected firmware version is correct for your device

model.

Checking for Live Updates

Warning

• To prevent data loss, QNAP recommends backing up all data on your device before

updating the firmware. For details about data backup, see 

Backing Up System

Settings

.

• Do not power off your device during the firmware update process.

Important

• Make sure you review through the 

Firmware Requirements

 before updating the

firmware.

• The update may require several minutes or longer, depending on your hardware

configuration and network connection.

1. Log in to QSS.

2. Go to System > Firmware Update > Live Update .

3. Click Check for update. 

QSS checks for available firmware updates. You can choose to update QSS if there is an available

update.

4. Click Update System. 

A confirmation message appears.

5. Click Update.

QSS updates the firmware.

Updating the Firmware Manually

Warning

• To prevent data loss, QNAP recommends backing up all data on your device before

updating the firmware. For details about data backup, see 

Backing Up System

Settings

.

• Do not power off your device during the firmware update process.

Important

• Make sure you review through the 

Firmware Requirements

 before updating the

firmware.

• The update may require several minutes or longer, depending on your hardware

configuration and network connection.

1. Download the device firmware.

QSW-M2106R User Guide

QSS   

30

Summary of Contents for QSW-M2106R















































Reviews:

No comments

Brands by name

Popular brands

Load more brands