QNAP QG-103N, User Manual, Page: 78 / 118

78 |
Setup Wireless Security with Web Interface
1. Login to the Web Interface using the Admin account.
2. Select [Setting] from the navigation panel.
3. Select [Security Type] in Wireless Security. For the best level of security, it is recommended to
use WPA2.
4. After entering the password twice, select [Save] to apply new security settings.
NOTE

After change Wireless security, please reconnect to the QGenie by using the new password.

WPA/WPA2, the valid password length is between 8 ~ 63 characters long.

WEP, the valid password length is between 5 or 13 characters long.
Firmware upgrade with Web Interface
1.
Turn on QGenie. Connect the PC to QGenie’s Wireless LAN.
2. Open browser and go to http://192.168.60.1/. Login to the Web Interface using the Admin
account.