QNAP QG-103N, User Manual, Page: 107 / 118

107 |
Update of the system software of this unit fails.

Update cannot be done if the battery charge is low. Confirm that the battery charge
remains 60% or more and then perform update. Press information button on QGenie
will display current power level.

Do not press the RESET switch or slide Power switch while updating.

Do not do the following while updating.

Insert/Eject a SD card or USB flash drive

Connect to a computer via USB

Connect the USB AC adaptor

Disconnect the USB AC adaptor

Allow access from other users

OLED screen will show current progress when upgrading.

Update the system software in a location where communication conditions are stable.
USB cable
The USB cable cannot be connected to this unit.

The connection is made incorrectly. Note the different plugs on both ends of the USB
cable, and connect the proper plug to each port.

A USB cable with plugs that do not much the ports of this unit is used. Use the USB
cable supplied with this unit.

When connecting iOS devices (*), use the dedicated cable bundled with your device.
*iOS device means iPhone, iPad, iPod touch, etc.