manualshive.com logo in svg

QNAP NAS TS-832PXU, User Manual, Page: 51 / 65

Share
Download
QNAP NAS TS-832PXU User Manual Download Page 51

Duration

Frequency

Description

Long beep (1.5 seconds)

3 (every 5 minutes)

• A power error occurred.

• The system fan is not

functioning.

• The fan module has been

removed.

• The installed fan module is

compatible.

• A system fan error occurred.

• The NAS is powered on.

• The NAS has completed

firmware update.

2

• The storage pool is about to

reach full capacity.

• The storage pool has reached

full capacity.

• A storage pool status error

occurred.

• The disk volume is about to

reach its full capacity.

• The disk volume has reached

its full capacity.

• The USB device is being

removed (USB one-touch
copy button).

• A volume status error

occurred.

• The drives are in degraded

mode.

• The user started the drive

rebuilding process.

• A drive is plugged in or out.

• The iSCSI is about to reach

full capacity.

1

• The NAS was powered off by

force shutdown (hardware
shutdown).

• The NAS was powered on

successfully and is ready.

Long and short beeps

1 long and 2 short beeps

The JBOD expansion unit has
been removed.

TS-x32PXU User Guide

Basic Operations   

50

Summary of Contents for NAS TS-832PXU


































































Reviews:

No comments