Port
Enter the port NAC-200 uses for
network connection.
PPPoE
For dynamic ADSL connection, enter
the user name and password provided
by ISP.
Dynamic DNS Server
To access NAC-200 via a domain name, enable
dynamic DNS service. You should first apply for
DDNS service from a service provider. Upon
successful registration, you can use DDNS service
for NAC-200. Check the box
Enabled
to enable
dynamic DNS server.
•
DDNS providers
Select a DDNS provider from the drop-down
menu: DynDNS, ODS, DHS, or DyNS.
•
User name, password, host name
Enter the user name, password and the host
name of the DDNS service. Check the box
Dynamic IP if you are using a dynamic IP service.
Specified DNS Server
To specify a DNS server for connection, check the
box
Enabled
and enter the IP address of the DNS
server.
Multicast
This function enables broadcasting a message to
multiple specified recipients. To use the multicast
function of NAC-200, check the box
Enabled
. Then
enter the IP address and the port. Note that
multicast function can only be applied within the
same network domain.
21
Summary of Contents for NAC-200
