1000A
User Manual
8
1. Stereo full range sub
satellite mode
This is the most common configuration for a
performer who is using the system as a stereo
full range playback for live or pre recorded
music.
In this configuration, the input volume control
acts as a master volume for the whole system
and the subwoofer control is post the input/
master.
Common system
configuration set ups
1
Right and left input XLR/Phono.
Connnect to mixer output
2
Line / Aux input selector. Select line to
engage stereo Sub/Satellite mode.
3
Master Volume. Set master volume to OdB
(max) for most mixer gain sensitivities.
4
Speaker outputs. Connect satelite
speakers L + R.
B_d[
H_]^j
C_n[h
B
H
H
Lebkc[
B
B[\j
&
G
A
'
B_d[
H_]^j
C_n[h
B
H
H
Lebkc[
B
B[\j
'7kn?dfkj(
1
2
3
4
Note:
High Cut for adjustment of the upper bass cross-over
frequency for the Sub bass amplifier set to below 100
Hz for low bass, above 125 for a higher range of bass
frequencies.
Subwoofer volume. To control sub bass volume level.
By increasing input volume and adjusting subwoofer
volume, a balance the satellite speakers and the sub
bass cn be achieved
