59235-02 A
1-1
Section 1
Introduction
This manual describes the QuickTools™ web applet (version 6.08) for SANbox
5000 Series switches (firmware version 6.8). The QuickTools web applet is the
primary focus of this manual which is organized as follows:
Section 1
describes the intended audience for this manual, related
materials, and technical support.
Section 2
describes how to use QuickTools, its menus, and its displays.
Section 3
describes fabric management tasks.
Section 4
describes switch management tasks.
Section 5
describes port and device management tasks.
A glossary of terms and an index are also provided.
1.1
Intended Audience
This manual introduces the switch management products and explains their
installation and use. It is intended for users responsible for installing and using
switch management tools.
Note:
If you haven't purchased QLogic Enterprise Fabric Suite 2007, try it for
30 days free of charge. Enterprise Fabric Suite 2007 is a suite of tools
for fabric management, performance monitoring, fabric monitoring,
distance configuration, switch configuration with configuration and
zoning wizards, and much more. A full featured 30-day trial is included
with the purchase of each SANbox 5000 Series switch. Enterprise
Fabric Suite 2007 can be installed from the CD-ROM found in the
accessories box of SANbox 5000 Series switches. Insert the CD into
the workstation of your choice and follow the prompts. Take advantage
of QLogic's powerful suite of fabric management tools for 30 days,
then contact your switch distributor or authorized reseller to purchase
Enterprise Fabric Suite 2007.
