manualshive.com logo in svg

Qlogic SANbox 5000 Series, User Manual

Share
Download
Qlogic SANbox 5000 Series User Manual Download Page 119

5 – Managing Ports

Viewing and Configuring Ports

59235-02 A  

5-17

L

5.3.6

I/O Stream Guard

The I/O Stream Guard feature suppresses the Registered State Change 
Notification (RSCN) messages on a port basis. I/O Stream Guard should be 
enabled only on ports connected to initiator devices. To configure the I/O Stream 
Guard option using the Port Properties dialog, open the Port menu, and select 

Port Properties

. Select the option that corresponds to one of the following 

options:

„

Enable 

— 

suppresses the reception of RSCN messages from other ports for 

which I/O Stream Guard is enabled.

„

Disable

 — a

llows free transmission and reception of RSCN messages.

„

Auto 

— 

suppresses the reception of RSCN messages when the port is 

connected to an initiator device with a QLogic HBA. The default is Auto. 
Refer to 

”Device Scan” on page 5-17

.

5.3.7

Device Scan

The Device Scan feature queries the connected device during login for FC-4 
descriptor information. Disable this parameter only if the scan creates a conflict 
with the connected device.

                                                                                           

Summary of Contents for SANbox 5000 Series



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands