6–Configuring RoCE
Preparing the Ethernet Switch
51
BC0154503-00 C
Preparing the Ethernet Switch
This section describes how to configure a Cisco
®
Nexus
®
6000 Ethernet Switch
and a Dell Z9100 Ethernet switch for RoCE.
Cisco Nexus 6000 Ethernet Switch
Cisco Nexus 6000 Ethernet Switch
Configuring the Cisco Nexus 6000 Ethernet Switch for RoCE comprises
configuring class maps, configuring policy maps, applying the policy, and
assigning a VLAN ID to the switch port.
1.
Open a config terminal session.
Switch# config terminal
switch(config)#
2.
Configure quality of service (QoS) class maps, setting the RoCE priority to
match the adapter (5).
switch(config)# class-map type qos class-roce
switch(config)# match cos 5
3.
Configure queuing class maps.
switch(config)# class-map type queuing class-roce
switch(config)# match qos-group 3
4.
Configure network QoS class maps.
switch(config)# class-map type network-qos class-ro
switch(config)# match qos-group 3
5.
Configure QoS policy maps.
switch(config)# policy-map type qos roce
switch(config)# class type qos class-roc
switch(config)# set qos-group 3
6.
Configure queuing policy maps to assign network bandwidth. In this
example, use a value of 50 percent.
switch(config)# policy-map type queuing roce
switch(config)# class type queuing class-roce
switch(config)# bandwidth percent 50
Summary of Contents for QL45212
Page 111: ......
