Qlogic 8400 Series, User Manual

Page: 89 / 391

7–Installing Management Applications
Installation Tasks
59 83840-546-00 D
WS-MAN
The following steps install the WS-MAN protocol for communication between the
client and managed host (server). WS-MAN is supported on both Windows and
Linux clients and servers.
Windows Server
On Windows servers, configure the WinRM service as follows:
1. Install the WinRM Software Component on Server .
2. Perform Basic Configuration on the Server .
3. Perform User Configuration on the Server .
4. Perform HTTP Configuration on the Server .
5. Perform HTTPS Configuration on the Server (to use HTTPS Instead of
HTTP)
a. Generate a Self-Signed Certificate for Windows/Linux Server .
b. Install the Self-Signed Certificate on Windows Server .
6. Configure WinRM HTTPS/SSL on the Server .
7. Perform Additional Server Configuration , if required.
8. Follow the procedure for “Installing QCS and Related Management
Applications” on page 85 .
Windows Client
On the Windows client, perform following configuration steps.
1. Perform HTTP Configuration (if you plan to use HTTP) .
2. Perform HTTPS Configuration (if you plan to use HTTPS) .
3. Configure WinRM HTTPS/SSL .
4. Following the procedure for “Installing QCS and Related Management
Applications” on page 85 .
Linux Server
On Linux server, use the following steps to install OpenPegasus. There are two
options available with respect to OpenPegasus: installing from the Inbox RPM or
installing from source. The Inbox OpenPegasus is only available on the Red Hat
OS. For SLES11, the only option is to use the source RPM. WS-MAN is not
supported with the Inbox RPM. If you plan to use WS-MAN then you must install
OpenPegasus from source.
1. Install OpenPegasus From the Inbox RPM (Red Hat Only) or Install
OpenPegasus From Source (Red Hat and SuSE) .
2. Start CIM Server on the Server .