7–Installing Management Applications
Detailed Procedures
74
83840-546-00 D
Install OpenPegasus From the Inbox RPM (Red Hat Only)
In Red Hat Linux, an Inbox OpenPegasus RPM is available as
tog-pegasus-<version>.<arch>.rpm
.
1.
Use the following command to install tog-pegasus:
rpm -ivh tog-openpegasus-<version>.<arch>.rpm
2.
Use the following command to start Pegasus:
/etc/init.d/tog-pegasus start
Note that in inbox Pegasus, HTTP is not enabled by default. After Inbox
OpenPegasus is installed successfully, if no further configuration is required, then
follow the instructions in
“Install QLogic CMPI Provider” on page 79
. To enable
NOTE
If your system has
Red Hat Security Enhancement for tog-pegasus
enabled, disable it before connecting to QCS. See
/usr/share/doc/tog-pegasus-2.5.2/README.RedHat.Security
for details. To disable it, remove the line from
/etc/pam.d/wbem
.
NOTE
On SuSE Linux, the Inbox OpenPegasus RPM is not available.
OpenPegasus must be installed from source, as described in the following
section.
NOTE
After the server is rebooted, the CIM server must be manually restarted to
enable the client to reconnect to the server. This is a known limitation of Red
Hat v6.2 Inbox RPM.
Summary of Contents for 8400 Series
Page 390: ......