4
95
Remote control
The remote control transmits signals to the system.
SLEEP button
To activate or deactivate the sleep mode.
TIMER button
To select the TIMER function.
MODE button
To select the operating mode: Feel, Cooling,
Dry, Fan and Heating.
DOWN button (TOO WARM button)
To lower the preset room temperature and
reduce time periods.
UP button (TOO COLD button)
To raise your preset room temperatu-
re and extend time periods.
FAN SPEED operation button
For the selection of the ventilator speed in the
indoor unit: automatic, high, medium and low.
VANE operation button.
To adjust the direction of the airstream.
ON/OFF button
For activation and deactivation.
Note: Each mode and the relevant functions will be specified hereafter.
Placing the batteries
Remove the battery cover in the direction of the arrow.
Place the new batteries as indicated (ensure that the positive (+) and negative poles (-) are in the correct
positions. Slide the battery cover back into place.
Note: Use 2 LR03 AAA (1.5 Volt) batteries. Do not use rechargeable batteries. Replace the batteries with new
batteries of the same type (see above) when the display starts to fade.
Storage of the remote control and tips for use
The remote control can be placed in a
wall-mounted holder.
Note: The remote control holder is
optional.
Using the remote control
Point the remote control at the receiver on the indoor unit of the
air conditioner. The air conditioner can be operated in this man-
ner up to a distance of 7 metres.
Receiver
