3
Product manual
■ How to connect with PC and save MP3 audio file
1. Please turn the unit off and connect USB C-TYPE cable on
the backside of CPK-CAN
2. Please create “01” folder on your PC and save the MP3 file
in the 01 folder.
- Max number of channels: 255 channels,
Max memory size: 128Mbyte
3. Please disconnect the USB cable after safely removing the
USB from the PC.
<USB connector at the back side of CPK-CAN>
<Built-in memory folder and audio file name>
• Power connection
- Power on with rated power at
④
3P terminal at the back side of
the unit.
- It requires approximately 3 seconds to product initiation.
• Volume control
-
It controls volume. Raise the buzzer volume by sliding the
②
control
lever clockwise(CW). Reduce the buzzer volume by sliding the
②
control lever counterclockwise(CCW).
• CAN communication connection
-
③
input terminal can configure CAN communication connection,
terminating resistance and Baud rate.
- Please refer to the manual regarding detailed terminal information.
①
②
③
④
• Possible to select and control sound through CAN communica-
tion. Please refer to the user’s manual on the website for CAN
communication protocol data.
[Download]
• Following instruction is how to name an audio file name.
Example >
■
File format
001 _
Music Name
.mp3
Filename (Korean/Chinese Up to 20
characters, English Up to 40 characters)
Separator (Track# and file title)
Track#
Sound selection and control
Installation Environment and Protection Rating
•
This product is designed for use with protection rating of IP65.
•
In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upsidedown
positions where water can potentially penetrate into the product and impact it’s operation.
•
For further information, please visit our website (www.qlight.com).
Volume Adjustment
• The volume output of this product is adjustable.
• Turn the volume dial clockwise to increase the volume, and turn
counterclockwise to decrease the volume.
• There will be no sound when the dial is put at MIN.
Volume Dial
VOL.
MIN.
MAX.
