![background image](http://html1.mh-extra.com/html/qlight/st45l-etn-bz/st45l-etn-bz_manual_3360327006.webp)
6
7
ETN POWER CONNECTOR
Cover(ABS)
Lens(AS)
Housing(ABS)
Pole(Al)
ETN CONNECTOR
ETN CONNECTOR
ETN POWER CONNECTOR
Parts Definition
Buzzer hole
How to Change Lens Kit
• When rearranging or replacing the lens kits, please be aware of the
contact point
①
and the connector pin
②
marked in the diagram on
the left.
•
Press down to assemble the lens kits while making sure that connecto
r
pin
②
and connector
③
aligns correctly.
• Please make sure that the rubber spacer placed on the top of each
lens kit is tightly secured to the bottom of the other lens kit.
※
Caution when lens kit
•
Lens kits are connected with connector pins each other. Bad connec-
tion may be experienced when the connector pins are touched with a
foreign substance.
•
If the lens kits are not turned on or not flashed after lens kits replace-
ment, please make sure status of lens kit connection.
②
③
①
Mounting Hole Specifications
①
Machine holes on the mounting surface referring to the diagram below.
②
Remove the flange nuts from bolts and place the product
through the mounting surface holes.
③
Fasten the flange nuts on the opposite side of the mounting surface until the product is tightened securely.
ST56MEL-ETN
ST45ML-ETN
ST80MEL-ETN
3-Ø5 HOLES
Ø12 CABLE ENTRY
Ø12 CABLE ENTRY
3-Ø5 HOLES
PCD 50
PCD 40
PCD 30
3-Ø5 HOLES
Ø12 CABLE ENTRY
Summary of Contents for ST45L-ETN-BZ
Page 11: ...MEMO...