Qlight QWCD35T, Manual

Page: 9 / 12

9
1. Please refer to page 8 ‘ SD Card Specifications and Sound
Saving Manual ’ to see how to save sound files.
- Supports up to 5 user-defined sounds.
2. Insert the SD card into the SD card slot.
3. Set the No. 1 switch of the sound setting switch to ON to select
external sound.
4. Use the play mode setting switch to select 1, 3, 5, 7 or 8 mode.
- Mode 8 is a test mode which continuously plays channel 1.
(In this case, channel selection is disabled.)
- For more information, refer to page8 ‘ Play Mode Setting ’.
5. Use the sound select switch to select the one of the 31 user-
defined sounds.
- For more information, please refer to page 7 ‘ Binary Input -
Playing External Sound (SD Card) ’ .
- For external signal line type (LC) products, please refer to
page 3 ‘ Bit/ Binary Input Method Depending on Wiring Method ’ .
※
Insert SD card → Sound switch setting → Play mode switch
setting → Channel selection
■ When Using an External Sound Source (SD Card) Source in
Binary Input Mode
1. Please refer to page 8 ‘ SD Card Specifications and Sound
Saving Manual ’ to see how to save sound files.
- Supports up to 5 user-defined sounds.
2. Insert the SD card into the SD card slot.
3. Set the No. 1 switch of the sound switch to ON to select external
sound.
- For more information, please refer to page 7 ‘ Selection between
Built-in Sound and External Sound (SD Card Type)
’
4. Use the Play mode setting switch to select 1, 3, 5, 7 or 8 mode.
- Mode 8 is a test mode which continuously plays channel 1.
(In this case, channel selection is disabled.)
- For more information, refer to page8,
‘
Play Mode Setting’
.
5. To select a channel, use the terminal block in the back side of
the product to select one of the 5 user-defined sounds.
- For more information, please refer to page 5 ‘ Bit Input - Use
External Sound (SD Card)
’
- For external signal line type (LC) products, please refer to
page 3 ‘ Bit/ Binary Input Method Depending on Wiring Method ’ .
※
Insert SD card → Sound switch setting → Play mode switch
setting → Channel selection
■ When Using an External Sound Source (SD Card) in Bit
Input Mode
1. Set the sound setting switch to OFF to select the built-in sound.
- For more information, please refer to page 7
‘ Selecting between
Built-in Sound and External Sound ’ .
2. Select one of 4 modes(2, 4, 6, or 8) by using play mode setting switch.
- Mode 8 is a test mode and the sound of channel 1 is continuously
played. (In this case, channel selection is disabled.)
- For more information, please refer to page8, ‘ Play Mode Setting ’ .
3. Use the channel selection switch to select one of t he 31 built in sound.
- For more information, please refer to page6,
‘ Binary Input - Use
Built-in Sound Source ’.
- For Extracted sound selection signal line type(LC) product,
refer to page3 ‘ Bit/ Binary Input Method According to Wiring
Method ’ for details of channel selection method.
2. QWCD35TSD/ QWCD50TSD
※
Sound switch setting → Play mode switch setting
→ Channel selection
■ When Using a Built-in Sound in Binary Input Mode
Model number
Built-in
sound
When playing a built-in sound When playing an external sound (SD Card)
Binary input Bit input Binary input
QWCD35T
QWCD50T
31 types of
sounds
Play one of 31 special warning
sounds
- -
QWCD35TSD
QWCD50TSD
31 types of
sounds
Play one of 31 special warning
sounds
Play one of the 5 user-
recorded sounds
Play one of the 31 user-
recorded sounds
Operation Method and Setting
1. QWCD35T/ QWCD50T
- Use ‘Channel Selection Switch’ to select one of the 31 built in
sounds.
- For more information, see page6 ‘Sound Selection’ section.
- For LC type product, refer to page3
‘ Bit/ Binary Input Method
According to Wiring Method ’
section for detailed manual of
channel selection method.
■ When Using a Built-in Sound in Binary Input Mode