6
Model number
Built-in sound
When playing a built-in sound
Binary input
QWCD35-TI
QWCD50-TI
31 types of sounds
Play one of 31 Special warning sounds
1. QWCD35-TI / QWCD50-TI
- Use ‘Channel Selection Switch’ to select one of the 31 built in sounds.
- Please refer to a manual on page #5 ‘Binary Input - Playing Built-in Sound’.
■ When Using a Built-in Sound in Binary Input Mode
Installation Environment and Protection Rating
• This product is designed for indoor and outdoor use with protection rating of IP66.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection ratings
indicated(IP66), it may cause malfunction or damage to the product.
• After installing the cable, tighten the cable entry as same level of protection rating of the product and seal it so that dust and moisture
can not penetrate into the product.
• For further information, please visit our website (www.qlight.com).
Operation Method and Setting
Precautions for installation
• In case of outdoor applications, install the product in the upright
position. Do not install the product horizontal or upside-down
positions where water can potentially penetrate into the product
and impact it’s operation.
Left direction
Reverse direction
Right direction
W
ALL
W
ALL
WALL
[Installation]
