4
5
Installation/ Mounting Hole Specifications
•
First, machine taps or holes on the mounting surface.
•
The mounting hole of this product is 6.5mm in diameter(hole).
•
When machining taps, fasten the bolt through the mounting hole of the product.
•
When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
•
Machine holes on the mounting surface referring to the diagram below.
.
■
Installation
■
Mounting Hole Specifications
Installation Environment and Protection Rating
• This product is designed to be explosion proof.
• Please make sure to use the product in an environment that meets the specified explosion proof rating and regulations.
• For further information, please visit our website (www.qlight.com).
90
2-Ø6.5
90
4-Ø6.5
L
MODEL
L
BRACKET
QLEX-SLM-250
-
1EA
QLEX-SLM-650
613
2EA
Summary of Contents for QLEX-SLM Series
Page 7: ...MEMO...
