![background image](http://html.mh-extra.com/html/motorola/lum0150b/lum0150b_manual_245118001.webp)
Modular Light
LUMO150B
Congratulations
on your choice of the
Motorola LUMO150B
Modular Light. The
Motorola LUMO150B
combines
high performance Flashlight / Lantern and Bluetooth Speaker. Please take a few moments to read this user guide to ensure that
you get the best performance.
PAGE 1/4
Included
1 X Motorola Flashlight Lantern
1 X Bluetooth Speaker Module
1 X USB to micro-USB cable (power charger only)
PAGE 2/4
Modular Light
LUMO150B
1. Unscrew the Bluetooth Speaker module by turning counterclockwise 1 & 3 . Take out the battery
holder 2 and insert 4 AA alkaline or rechargeable batteries.
2. Position batteries according to polarity marking 2 , and screw the Bluetooth Speaker module by
turning clockwise.
3. To turn the Flashlight / Lantern on, pull the globe and press the “M” button a , the flashlight will
always turn on at the brightest setting with the lantern mode. Hold the “M” button a down can dim
or brighten. The light will flash twice at the lowest / brightest level.
- Do not attempt to charge alkaline batteries.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc.) batteries.
4. To enable flashlight mode, collapse the globe.
5. Press and hold the “ON/OFF” button b for 2 to 3 seconds to switch on the Bluetooth Speaker module.
Voice reminder after the Bluetooth Speaker being activated:
1. When the Bluetooth Speaker module is on, voice indicator will say “Hello, This system is ON.
Enter pairing mode”.
2. When pairing is completed, the voice indicator will say “Connected”.
3. When it is disconnected, the voice indicator will say “Disconnected, Enter pairing mode”.
4. When the Bluetooth Speaker cannot be connected successfully, the voice indicator will say
“Enter pairing mode”.
5. Press and hold the “ON/OFF” button b again to switch off the Bluetooth Speaker module, the
voice indicator will say “Bye Bye”.
6. When the battery is low, the voice indicator will say “Low Battery”.
If the Bluetooth Speaker module did not pair with any devices, the voice indicator will say “Enter
pairing mode” every 3 minutes until the module is paired.
If the Bluetooth Speaker module cannot pair with any devices within 15 minutes, the voice
indicator will say “Bye Bye” and switch off the unit automatically.
6. To disconnect the Bluetooth Speaker connection by holding the “ON/OFF” button b for 2 seconds.
7. When the Flashlight / Bluetooth Speaker at low battery level, the voice indicator will say “Low Battery”
to remind the unit needs to be re-charged.
8. Remove the USB charger cover and connect with the USB cable to charge the unit. The unit is
charging if the green / red light c flashing alternatively. For example, it will take around 7 hours to
fully re-charge a 1300mAh Ni-MH battery and the green light is on when the unit is being fully
charged.
Flashlight/Lantern with Bluetooth Speaker Module
Product Specifications
H
H
Module
Flashlight / Lantern
Ø51.5*153mm
3-6V
AA Ni-MH rechargeable
4pcs
Cree XPG2
Max.180Lm
M logo button
>5H
NIL
NIL
NIL
NIL
NIL
NIL
IPX4
Bluetooth Speaker
Ø51.5*64mm
3-6V
AA Ni-MH rechargeable
NIL
NIL
NIL
ON / OFF
>5H
Max.250mA
Voice indicator
Red/Green alternatively
Green LED on
Min.8H
Micro USB
IPX4
Size
Operation voltage
Batteries Type
Battery quantity
LED
Lumens
Operation button
Max. operation time
Charging current
Low Power LED indication
Charging LED indication
Full Charging LED indication
Charging time (1300mA)
Charging USB port
Water proof