Qiyang QY-IMX6S Manual Download Page 11

Page: 11 / 72

QY-IMX6S Linux Function And Test Manual

Any question, please send E-mail

[email protected]

Page 11 of 72

Sales E-mail

:[email protected]

[email protected]

Website

:http://www.qiytech.com

Test Code

：

CD/Source Code/Test Code/ rtc_test/rtc_test.c

Driver Code

：

ds1338 Driver

：

linux-3.0.101/drivers/rtc/rtc-ds1307.c

i2c Driver

：

linux-3.0.101/drivers/i2c/busses/i2c-imx.c

The Kernel Options

：

I2c2:

Device Drivers --->

I2C support --->

[*] Enable compatibility bits for old user-space

< *> I2C device interface

< > I2C bus multiplexing support

[*] Autoselect pertinent helper modules

I2C Hardware Bus support --->

[ ] I2C Core debugging messages

[ ] I2C Algorithm debugging messages

[ ] I2C Bus debugging messages

rtc:

Device Drivers --->

[*] Real Time Clock --->

[*] Set system time from RTC on startup and resume

(rtc0) RTC used to set the system time

[ ] RTC debug support

*** RTC interfaces ***

[*] /sys/class/rtc/rtcN (sysfs)

[*] /proc/driver/rtc (procfs for rtc0)

Summary of Contents for QY-IMX6S









































































Search results

Summary of Contents for QY-IMX6S

Reviews:

Related manuals for QY-IMX6S

Brands by name

Popular brands

Qiyang QY-IMX6S, Manual

Search results

Summary of Contents for QY-IMX6S

Reviews:

Related manuals for QY-IMX6S

Brands by name

Popular brands