User manual | Qimova chair
Page 44 of 48 | Version 1.10
1.
Positive cable connector, red
2.
Negative cable connector, black
3.
Left-hand battery positive terminal connector, red
4.
Right-hand battery negative terminal connector, black
5.
Left-hand battery negative terminal connector, black
6.
Right-hand battery positive terminal connector, red
7.
60 Amp fuse
8.
5 Amp fuse
Figure 41
CAUTION: ELECTRIC SHOCKHAZARD!
Please be extremely careful when carrying out the following steps, in order not to short-
circuit the batteries and yourself, and to avoid risk of burns or electrocution. If in doubt,
please contact your local dealer.
Instructions are placed on the inside of the battery cover.
•
Disconnect the black and red cable connectors from the terminals nearest to the
centre of the chair (1 and 2).
•
Remove the old batteries from the chair (lift them out of the battery box )
•
Disconnect the cables from the battery terminals (3, 4, 5 and 6). Make sure you do
not touch the opposite terminals while doing so.
•
Replace the batteries and reconnect the cables to the terminals of the new batteries.
•
Place the new batteries in the battery box of the chair.