Installation
UM Pallet dispenser PD2 v2.0 EN
33
6. Check if all sensors are properly aligned.
7. Check if the lifting forks are mounted at the right location on the horizontal carrier
depending on the pallets that are being used. The opening in the pallet needs to
be aligned with the forks on the horizontal carrier. If they’re not, it is necessary to
adjust the lifting forks by loosening the bolts of the forks and relocate the forks to
the right location. Make sure the bolts are properly secured after
adjusting/mounting the lifting forks to the carrier again.
8. Check if the back (E) and side restraints (F) are at the right location in combination
with the type of pallet used
. There shouldn’t be more than 2,5cm/1inch of play
between one of the side restraints and the lowest empty pallet. If not, adjust them
accordingly.
CAUTION
Make sure that step 5, 6, 7 and 8 are fulfilled! If not, the
machine is not safe and must not be used.
Note
If more than one machine is placed in a pallet conveyor system,
make sure that the centre distance between machines is at least
160cm/63inches.
Note
See specification sheet for minimal and maximal pallet sizes that
can be used.
