SQ Remote Power Management User’s Manual
5 Using Configuration Menu
5.1 Starting Configuration Menu:
There are four ways to start the Configuration Menu:
1) Local Master Port access method. Run a terminal program from a work station via serial
connections between a serial port from your work station and the Local Master Port of the
system.
2) External Modem device access method. Run a terminal program from a remote work state
and establish the connection via a telephone line.
3) Telnet access method. Your workstation and the system are connected to LAN.
4) Web access method. Your workstation and the system are connected to LAN.
5.2 Viewing and Changing Operation Status
Figure 14 shows a web page that lets you to view and change power outlet operation status
.
Figure 17 – System Operation Static (Web Page)
With this web page, you are able to:
• View on/off status for each power outlet. As shown in the table, Power outlet 1 is power on
(illuminated in red) and outlet 2 is power off (not illuminated, in grey).
• Change power outlet on/off status by clicking “on/off” push switch button icon.
• Reboot a power outlet by clicking “Reboot” push switch button icon.
• Get present current and temperature by clicking “System Status” link.
____________________________________________________________
22
Addr
：
A/4F, 2# Building , No.401, Caobao Road , Shanghai ,China Zip
：
200233 Web
：
www.sq-catv.com
Fax
：
86-21-64858301 - 62401979 Tel
：
86-21-54973555 – 34140103 - 64957666 E-mail
：
