SQ Remote Power Management User’s Manual
____________________________________________________________
20
Addr
：
A/4F, 2# Building , No.401, Caobao Road , Shanghai ,China Zip
：
200233 Web
：
www.sq-catv.com
Fax
：
86-21-64858301 - 62401979 Tel
：
86-21-54973555 – 34140103 - 64957666 E-mail
：
4 Using Control Command
A NP system provides command line options for viewing or changing system configuration
and operation status. In addition, by using the control command option, users are able to
create script files for automation of equipment test and control.
Control commands are applicable to the connections between your work station and Local
Master Serial Port or a Telnet session.
Some of the control commands are also applicable to emails. See related sections for more
detailed information about how to setup email accounts.
Once the system starts or a Telnet session is open, you are ready to send control command
to the system. Type command “help” to have a complete list of available commands, as
shown in Figure 13.
All login levels including anonymous users are able to use the command line option.
However, the actual command executions are based on your login level. For example, if you
are an anonymous user, you are not able to reserve or un-reserve serial console ports or
power outlets. If you login at Administration level, you are able to operate any serial ports
and power outlets, reserve or unreserved any ports or outlets even if they are reserved by
other users. See Section 2.2 for a complete description of user privileges.
