Qiagen QIAcuity 911000 User Manual Download Page 28 | Manualshive

Page: 28 / 314

background image

QIAcuity User Manual 06/2022

28

Unpacking the QIAcuity

WARNING

Risk of personal injury and material damage

The QIAcuity is too heavy to be lifted by one person. To avoid
personal injury or damage to the instrument, do not lift the
instrument alone. The bottom plane shall be used for lifting. Do not
lift at the touchscreen.

[W2]

Note

: Before unpacking the QIAcuity, move the package to the site of installation and check that

the arrows on the package point upward. In addition, check whether the package is damaged. In
case of damage, stop here and contact QIAGEN Technical Services.

1.

Cut the straps securing the packaging to the shipping pallet.

2.

Open the top of the transportation box to remove the accessories set before lifting the box.

3.

Remove the top and side protective black foam.

4.

When lifting the QIAcuity, we recommend to utilize a minimum of two people. Lift the
instrument by sliding your hands under both sides of the workstation and keeping your back
straight.

5.

Important

: Do not hold the touchscreen display while unpacking or lifting the QIAcuity as it

might damage the instrument.

6.

Check if the packing list document is included after unpacking the QIAcuity.

7.

Read the packing list to check that you have received all items. If anything is missing, contact
QIAGEN Technical Services.

8.

Check that the QIAcuity is not damaged and that there are no loose parts. If anything is
damaged, contact QIAGEN Technical Services. Make sure that the QIAcuity has equilibrated
to ambient temperature before operating it.

9.

Retain the package in case you need to transport the QIAcuity in the future. Refer to Packing
the QIAcuity for more details. Using the original package minimizes the possibility of damage
during transportation of the QIAcuity.

Packing the QIAcuity

WARNING

Risk of personal injury and material damage

The QIAcuity is too heavy to be lifted by one person. To avoid
personal injury or damage to the instrument, do not lift the
instrument alone. The bottom plane shall be used for lifting. Do not
lift at the touchscreen.

[W2]

«
...
26
27
28
29
30
...
»

Summary of Contents for QIAcuity 911000



























































































































































































































































































































Reviews:

No comments

Related manuals for QIAcuity 911000

Brand: X-Rite Pages: 80

Brand: Panasonic Pages: 72

KW9M Eco-Power Meter

Brand: Panasonic Pages: 2

Brand: Idexx Pages: 6

Brand: IDEAL INDUSTRIES Pages: 10

Brand: M-system Pages: 5

Brand: MADDALENA Pages: 4

Brand: Macnaught Pages: 4

Brand: P3 International Pages: 1

ProcessMaster FEP630 series

Brand: ABB Pages: 92

Brand: National Instruments Pages: 15

Brand: Percussion Play Pages: 3

Brand: Trotec Pages: 14

Brand: MICRO-EPSILON Pages: 82

Duomat Evolution DeLuxe

Brand: Dennerle Pages: 27

Brand: Seaward Pages: 2

Brand: Teledyne Lecroy Pages: 3

3501B1260KG/M010LN

Brand: PCB Piezotronics Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands