Qiagen Q-Base, User Manual, Page: 21 / 40

Q-Base User Manual 03/2019 21
1. In the IP address field, enter the IP address that should be used for the Q-Base.
2. In the Subnet mask field, enter the subnet mask that should be used for the Q-Base.
3. Optional : Enter the DNS server in the DNS server field.
4. Optional : In the Gateway field, enter the IP address of the gateway.
5. Press Connect.
6. Proceed with step 10 in Section 4.3.2 (page 18).
• LAN connection using DHCP
1. To use DHCP-configured LAN, select
DHCP
in the
network settings
area.
Note : When using DHCP-configured LAN, the network settings for Q-Base will be obtained
automatically from the DHCP server. No further input is required. It takes some seconds to get
configured and connected.
2. Proceed with step 10 in Section 4.3.2 (page 18).