Qiagen Q-Base, User Manual, Page: 20 / 40

Q-Base User Manual 03/2019 20
16. Connect your tablet to the Q-Base (refer to section 4.4).
17. In the browser: Select Sign Out on the left-hand side.
18. Close the browser.
19. Remove the cable between ETH0 and your PC.
4.3.2.1 Connecting to WLAN/Wi-Fi
Note : Q-Base only supports connection to Wi-Fi networks with visible SSIDs and WPA2.
1. Press the WLAN tab of the Q-Base Administration Portal to configure the Wi-Fi connection.
2. Press Scan to search for available Wi-Fi networks.
3. Select the desired Wi-Fi network from the list of Available networks .
4. Once selected, enter the Wi-Fi password in the Password field.
Note: The server, SSID and security type details will be automatically filled.
5. Click Connect .
6. Proceed with step 10 in Section 4.3.2 (page 19).
4.3.2.2 Connecting to LAN (static IP or DHCP)
• LAN Connection with Static IP
Note : If you intend to connect Q-Base to a LAN that does not support automatic assignment of IP
addresses (i.e., does not support DHCP), you might require additional support from an IT
professional.
Note : When entering details into the screen above, Static IP Manual is selected by default