QHY4040
10
07
Use QHY168M in EZCAP_QT
EZCAP_QT (
is a software made by QHYCCD. This software has both windows, linux and
MAC/OS version. This software created with the opensource QT software. This software can be modified
if you want the source code. It has the basic capture function and working in single frame mode.
1. Install EZCAP_QT software.
2. Connect your QHY4040 to 12V power supply. Connect your QHY4040 to your computer with USB3.0
cable.
3.
Run EZCAP_QT. Select “Connect” in Menu->Camera. If the camera is successfully connected. The
title of EZCAP_QT will display the camera firmware version and the camera ID as shown below
You can change the language of the software at menu->language.
4. In menu->camera setting->temperature setting, you can set the power and target temperature. In AUTO
mode, you can set the target temperature. And in manual, you can set the TEC power percent. It may
need some minutes to get the temperature to target.
