QHW Audio THE BOX II, Owner'S Manual

Page: 7 / 20

THE BOX II
Owner's manual
7
Installation and connections
For installing The Box II in your audio
equipment you will need two stereo audio wires
(or four, if you want to use wires which doesn't
come by pairs) with RCA connectors.
Before making any connection,
make sure that The Box II is
unplugged from mains and any
other equipment taking part in
connection is powered off.
Connect outputs form equipment sourcing
signal to The Box II input to the input terminals
[number 2 in description drawing] in the device
rear panel and paying attention to channels LEFT
and RIGHT order.
Connect outputs from The Box II [number 3
in description drawing] in device rear panel, to the
inputs of the equipment which The Box is sending