QHW Audio THE BOX II, Owner'S Manual

Page: 15 / 20

THE BOX II
Owner's manual
15
You can set gain with The Box II powered
on or off. If volume is too high or The Box II is
connected to a very sensitive power amplifier,
small noises can be heard when switching gain at
no signal and if there is a signal present while
doing it, take in consideration increasing gain will
result in louder sound at your speakers. Therefore,
be careful with results.
Operation
During operation, LED light in frontal panel
will be on. This light is not direct and comes from
interior of enclosure, so depending on angle you
are viewing it from you will see it brighter or
dimmer. This has been made this way to avoid LED
to disturb you when in darkness in your Home
Theatre watching a movie, in example.
When The Box II powers up you can hear a
small noise, especially if it is connected to a very
sensitive power amplifier. This is normal behavior,
The Box II does not have mutting relays or