QHW Audio THE BOX II, Owner'S Manual

Page: 13 / 20

THE BOX II
Owner's manual
13
The power supply supplied by
QHW Audio uses safety earth
and must be connected to an
outlet which provides it.
If cable included with The Box II does not fit your
region plug, you will need one complying with
IEC60320 C14 in The Box II external power supply
end.
Setting gain
The Box II features a configurable by user
gain. This gain can be set to 0.8, 3, 6, 9.5 or 12 dB
to suit your needs and tastes. Configuration is
done by setting the microswitches accessible from
the bottom of unit. Each switch has two positions,
OFF and ON. To change each switch you can gently
use a little screwdriver or your finger tip. Pay
attention that configuration is the same in both
channels.