background image

 

 

3

anywhere warm and damp, or if you move the unit from 

somewhere cold (e.g. Your car boot) to a warm room. In this 

case, let the unit stand for 1-2 hours, or gradually increase the 

room temperature so the unit is dry before you use it.   

* Do not place it where it could be subject to vibration. 

* When this unit is used near a TV, the TV picture could be 

distorted. If this happens, move the unit away from the TV. If 

this does not correct the situation, avoid using the unit when the 

TV is turned on. 

* Keep the CD door closed so the lens is not contaminated by 

dust. Do not touch the lens. 

 

SAFETY MECHANISM

 

This unit incorporates a safety interlock mechanism which 

switches the laser beam on and off, so that when the disc holder 

is open, the laser beam stops automatically.   

 
 

 
 

This set employs an optical laser beam system in the CD mechanism 

designed with built-in safeguards. Do not attempt to disassemble. 

Exposure to this invisible laser light beam may be harmful a human eye. 

This is a Class 1 laser product. Use of controls, adjustments or 

procedures other than those specified here in may result in hazardous 

laser light beam exposure. This compact disc player should not be 

adjusted or repaired by anyone except qualified service personnel. The 

laser mechanism in the set corresponds to the stylus (needle) of a record 

player. Although this product uses a laser pick-up lens, it is completely 

safe when operated according to directions. 

 

 

Summary of Contents for TURN-200















Reviews: