background image

 

 

1

SAFETY PRECAUTIONS 

 

* This product is designed for use in moderate climates. Do not 

use or install this unit where it would be exposed to direct 

sunlight or in extremely hot temperatures, or near a radiator, 

stove or appliance that produces heat.   

* Do not take this unit into the bathroom, or near a swimming pool. 

Do not use it where it would expose to water, moisture, 

dripping or splashing.   

* Do not put the objects filled with liquids, such as vases, on the 

product. 

* Do not place the naked flame sources, such as candles, on the 

product.  

* If water gets inside the unit. Unplug the power adapter from the 

supply socket and consult your dealer.   

* Do not handle the power adapter with wet hands. To avoid 

electric shock, NEVER touch any internal parts. 

Repairs/Servicing should be left to a qualified service person. 

* When connecting or disconnecting from the mains supply, hold 

the plug, not the cord. Pulling the cord may damage it and could 

be dangerous.   

* Do not drop the unit. Do not spill liquid into it or allow objects to 

fall in it. 

* If the unit fails to operate, disconnect from the mains and 

consult a qualified service person.   

* When plugged in, a very small current will flow. To save 

electricity and for safety when not using the unit for an extended 

period of time, it is recommended that the product is completely 

disconnected at the AC mains socket.   

* Do not bend the cord sharply, pull or twist it. 

* Do not modify the power adapter in any manner. 

* Do not insert any metallic object into the unit. 

* In case of malfunction due to electrostatic discharge just reset 

Summary of Contents for TURN-200















Reviews: