QEP Brutus 60010, Owner'S Manual

Page: 7 / 43

- 8 -
CAUTION! Follow all of the Set Up & Operation Instructions completely before connecting the saw to a power source
or turning the motor on.
The 60010 requires minimal assembly, and as been factory inspected before shipping. Carefully open the container and
remove all saw components and packing materials. Ensure that you have each item before discarding the container or
packing materials. In addition to the hardware bag and wheels, the contents include:
SET UP AND OPERATION
Saw-Frame with Cutting Table
10" Continuous Rim
Diamond Blade
*
Water Tray with Drain Plug
Blade Guard
Rip Guide & Miter Block
Cutting Head
Water Pump
Saw Stand with Locking Wheels
Wrenches & Hex Keys
FOR Y OU R OWN SA FETY REA D IN STRUC TI ON
MANUAL BEFORE OPERATING SAW.
• Wear eye protection.
• Never operate the saw without the blade guard or belt
guard in place.
• Unplug saw before servicing, when changing cutting
wheels and cleaning.
• Use saw only with smooth-edge cutting blades free
of openings and grooves.
• Replace damaged cutting blades before operating.
WARNING
PERSONAL INJURY C A N OCCUR IF O P E R AT E D
IMPROPERLY.
•
Keep fingers and loose clothing away from rotating
blade.
• When operating, make sure hands and fingers are
clear from the blade groove, in the cutting table. Severe
abrasion, cuts, or pinching of hands or fingers can occur
as the table is advanced, particularly at the end of its
travel.
• Electrical shock can occur if operating instructions
are not followed.
* The continuous rim diamond tile blade is ideal for cutting ceramic tile. Cutting other materials, including porcelain tile, may require different types of blades.