QED LANDTEC i-Q Series, Operation Manual

Page: 40 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 40 of 51
4) Simply lift the pressure module from its location (Bay 8, see Module bay positions ) to gain access to the
coin cell – see annotation 1 in Figure 14 .
Figure 14 – Pressure Module Removal
5) Using the spudger supplied with the replacement coin cell, lift the old coin cell out of its cradle
Figure 15 – Coin Cell Removed
6) Fit the new coin cell, ensuring correct orientation, with the positive terminal (+) facing upwards
Figure 16 – Coin Cell Orientation
1