Page
10
of
36
OMSEM5000 Iss. 01
5
INSTRUMENT FUNCTIONS
Switching the instrument ON and OFF
Switch ON
Press the ON/OFF button for a few seconds, until
the display is activated.
The start sequence includes several steps:
-
Geotech logo.
-
Firmware version of the instrument, detector
board information, instrument serial number
and next service/calibration date.
-
Current date / time and next calibration.
If there is data stored in the instrument, you will see
the message "DATA TO DOWNLOAD". In order to
download the data, the ProSoft software must be
used.
The instrument will warm up and self-calibrate. The
warm up will last approximately 20-seconds and
during this time, t
he instrument’s function
s are not
available for use.
Once the warm up and calibration are complete, the
four LED lights will blink and the alarm will sound.
The SEM5000 is now ready for use.
Switch OFF
To switch off the instrument, press and hold the
ON/OFF button for a few seconds. A shut off
message will appear on the display and a timer will
count down. Once the counter starts to count down
the button can be released.
