QED AP4 Ultra Operation Manual Download Page 42

2

Subassemblies and Other Equipment Manufactured by Others

QED Environmental Systems shall be released from all obligations under all warranties if any product covered hereby
is repaired or modified by persons other than QED service personnel (unless such repair by others is made with the
written consent of QED); resold to other parties; and/or moved to or used on a site other than originally specified.

It is understood and agreed that QED Environmental Systems shall in no event be liable for incidental or consequential
damages resulting from its breach of any of the terms of this agreement, nor for special damages, nor for improper
selection of any product described or referred to for a particular application. Liability under this warranty is limited to
repair or replacement F.O.B. QED’s factory, or its appointed agent’s shop, of any parts which prove to be defective
within the duration and conditions set forth herein, or repayment of the purchase price at the option of QED, provided the
products have been returned in accordance with the duration and conditions set forth herein.

The foregoing warranty does not apply to major subassemblies and other equipment, accessories, and other parts
manufactured by others, and such other parts, accessories, and equipment are subject only to the warranties, if any,
supplied by their respective manufacturers. QED makes no warranty concerning products or accessories not
manufactured by QED. In the event of failure of any such product or accessory, QED will give reasonable assistance to
Buyer in obtaining from the respective manufacturer whatever adjustment is reasonable in light of the manufacturer’s
own warranty.

Illustrations and Drawings

Reasonable effort has been made to have all illustrations and drawings accurately represent the product(s) as it actually
was at the time of doing the illustrations and drawings. However, products may change to meet user requirement and
therefore may not be reflected in the literature. In addition, literature may be updated to reflect the most recent equipment
revision(s).  Changes to either or both equipment and/or literature can be made without notice.

Buyer’s Remedies

The buyer’s exclusive and sole remedy on account of or in respect to the furnishing of defective material or workmanship
shall be to secure replacement thereof as aforesaid.  QED shall not in any event be liable for the cost of any labor
expended on any such product or material or for any special, direct, indirect or consequential damages to any one by
reason of the fact that it shall have been deemed defective or a breach of said warranty.

Changes without Notice

Prices and specifications are subject to change without notice.

Shipping Dates

Shipping dates are approximate and are subject to delays beyond our control.

F.O.B. Point and Title

All material is sold F.O.B. factory. Title to all merchandise sold shall pass to Buyer upon delivery by Seller to carrier at
factory. All freight insurance is the responsibility of the Buyer and shall be charged to the Buyer on the invoice unless
directed in writing. All Freight claims are the Buyer’s responsibility.

Terms

Payment terms are Net 30 days; 1.0% per month past due.

State and Local Taxes

Any taxes, duties or fees which the seller may be required to pay or collect upon or with respect to the sale, purchase,
delivery, use or consumption of any of the material covered hereby shall be for the account of the Buyer and shall be
added to the purchase price.

Acceptance

All orders shall be subject to the terms and conditions contained or referred to in the Seller’s quotation, acknowledgments,
and to those listed here and to no others whatsoever.  No waiver, alteration or modification of these terms and conditions

39

AP Ultra Pump - Terms, Conditions, and Warranty  

AP Ultra Pump - Terms, Conditions, and Warranty  

Summary of Contents for AP4 Ultra












































Reviews: