background image

4

5

OPENING SIZE AND ANGLE MOUNTING

The Spectrum will fit inside openings from 29.9-41.3" (76-

105 cm) and in front of openings 26.8-38.2" (68-97 cm). 

The size of the gate is adjustable by moving the panels 

apart and repositioning 

the clamps. 

Besides the normal 

perpendicular mounting, 

the Spectrum gate can 

be mounted at any angle 

within 180 degrees. 

This allows the gate to 

be mounted inside the 

opening, in between odd angled locations, as well as in 

front of openings. If installed in front of an opening, the 

gate will fit openings up to 38.2" if mounting surface is flat. 

BASEBOARD AND QUARTER ROUND 

INSTALLATION

General - 

This gate may be installed at the top and 

bottom of stairs, in openings and doorways, that are 

strong and rigid with a flat and clean mounting surface. 

 

Included Installation Tools

If mounting over baseboard, and your 

baseboard height is 4.25” or less you can 

use the included Baseboard Spacers for 

a vertical installation of the Hinge and 

Locking FastMount® Rails. See page 12.

If there is a quarter round present, 

remove the quarter round insert at 

the bottom of the FastMount® Rail as 

described in Step 1 before installation.

Additional Qdos Installation 

Accessories - 

For challenging installation 

situations and surfaces, one or more of 

the following Qdos Baby Gate Accessories 

might be necessary for a secure 

installation.

Qdos Universal Baseboard Kit -

If the baseboard is more than 4.25" tall you 

will need to use the Qdos Baseboard Kit in 

order to create a vertical mounting surface. 

Works for baseboards up to 7/8" (22 mm) 

thick and up to 7" (18 cm) tall.

Qdos Universal Stair Mounting Kit – 

If installing on stair banisters or in between 

spindles, use Qdos Universal Stair Mounting 

Kit that wraps around square banister posts 

up to 4" in diameter and round banisters up 

to 5" in circumference, as well as between 

stair spindles. No screws required so no 

damage to your staircase.

Opening

Size

Where to clamp gate together (Top and Bottom)

29.9"-32.8"

(76-83.25 

cm)

32.8"-35.6"

(83.25-90.5 

cm)

35.6"-38.5"

(90.5-97.75 

cm)

38.5"-41.3"

(97.75-105 

cm)

Summary of Contents for Spectrum










Reviews: