H
ardware Installation
Follow the detailed procedures described in this section for easy
installation of the QDI ZX1280 Graphic card onto your computer
system. The only tool needed for installation is a screwdriver.
Note!
Before installing the QDI ZX1280 AGP card, touch a metal
surface of your computer to discharge yourself from static charge,
hold the graphic card by the edges be sure not to touch the IC
chips, leads or circuits.
1.
Before opening the computer cover, be sure the power to
the computer system unit and all devices connected to it are
turned off. Disconnect the computer from the power supply.
2.
In a typical PC computer all cover mounting screws are
located on the back of the computer. Remove these screws
and save them. Carefully remove the cover.
3.
Remove the existing VGA card or disable the mainboard’s VGA.
4.
Remove the AGP slot shield at the back of the computer by
removing its retaining screw and lifting it out. Save the screw.
User’s Manual 3
Feature Connector
SGRAM or SDRAM
TV-
Encoder
