Click the Additional Settings tab for Gamma Correction panel.
Gamma Correction modifies color values to compensate for dif-
ferent characteristics of different monitors. If the default setting
is not required, change the values of Brightness and Contrast by
dragging the sliders. Adjust Red, Green and Blue simultaneously
or respectively by selecting Those Channels or not.
Configuring Windows NT 4.0 Driver
To configure your Windows NT 4.0 driver once it is installed,
follow the procedures listed below.
1.
Right click on the Windows NT desktop and select
Properties.
2.
From the Display Properties dialog box, you can change
your driver and monitor configurations. Click on the Settings
tab, located at the top of the dialog box, and adjust the settings
using the drop-down boxes and slider bars.
3.
Follow the on-screen prompts for completing Windows NT 4.0
driver or monitor configuration.
Drivers Auto-Installation 12
