Manual for WinneX 5
Clear CMOS (JCC)
If you want to clear CMOS, unplug the AC power supply first, close JCC (pin1 & pin2)
once, set JCC back to the normal status with pin2 & pin3 connected, then power on
the system.
Enable/Disable on-board audio CODEC (JSD)
If you want to use the on-board audio CODEC, set JSD with pin2 & pin3 closed
(default). Otherwise, set JSD with pin1 & pin2 closed for disabling this function.
Enable keyboard password power-on function (JKB)
The mainboard provides the advanced keyboard password power-on function.
Before using this function, set JKB with pin1 & pin2 closed. Otherwise, set JKB with
pin2 & pin3 closed for disabling.
14
Installation Instructions
Disable:
Enable:
Enable on-board audio:
Disable on-board audio:
JSD
Normal status:
Clear CMOS:
(Unplug the AC power supply)
1
JCC
1
JCC
2
3
JSD
1
2
3
1
2
3
2
3
2
JKB
3
2
JKB
1
3
1
